Friday, 22 December 2017 11:38

Basslink dismisses Hydro Tasmania's claims on isolating cause of cable failure Featured


Basslink chief executive Malcolm Eccles has dismissed Hydro Tasmania's claim that it had found the reason behind the Basslink cable failure in 2015, saying that the expert reports cited as proof merely outlined one possible cause of the outage.

The company said that it continued to stand by the independent investigation undertaken by Cable Consulting International, which said the subsea cable fault was caused by a “cause unknown”. And based on these findings, Basslink said it maintained the cable fault was a force majeure event.

The cable link suffered a six-month outage from December 2015 onwards. On Wednesday, Hydro Tasmania claimed two experts that it had commissioned had found the cause of failure, saying it happened because Basslink had exceeded its design limit.

But Eccles (below, right) hit back today, saying Hydro Tasmania's experts had not provided conclusive and definite proof that this was the reason behind the failure.

“Having conducted an initial review of the reports — which are yet to be made public — there are a number of key points that we would like to highlight,” he said.

eccles vert“Firstly, Hydro Tasmania’s experts did no actual testing on the Basslink cable or any similar HVDC cables. They used a theoretical model based on certain assumptions to come to a set of conclusions. These assumptions make the experts’ conclusions speculative and not based on actual facts.”

A statement from Basslink said Hydro Tasmania’s own experts recognised that their reports did not conclusively determine the cause of the cable failure. The reports merely offered an opinion based on certain assumptions, that overheating was caused by excessive transmission of electricity from Tasmania to the mainland.

Eccles added that the expert reports had not solved any "mystery" as alleged by Stephen Davy, the chief executive of Hydro Tasmania.

The statement said the company had operated and maintained the Basslink facilities as per the instructions of the manufacturers, Siemens and Prysmian, and according to "good electricity industry practice".

The manufacturers had a control system and Cable Load Prediction System to protect Basslink facilities from overheating.

"As reported in December 2016, when the Basslink interconnector fault investigation was completed, Cable Consulting International, one of the world’s leading submarine power cable experts, noted that the other section of the cable it sampled was in sound condition," Basslink said.

"Basslink received the reports 45 minutes before Hydro Tasmania and the minister for energy made their announcements. Compounded by the closeness of the Christmas break, Basslink does not expect that it can get an adequate view on the reports, the assumptions contained in them, as well as advice from the manufacturers or from Basslink’s experts in the short term.

"Less than two days after providing the reports to Basslink, Hydro Tasmania has asked Basslink to confirm that it would implement the recommendation to limit the operation of the interconnector to the continuous rating of 500MW while continuing to review the provided reports."

The Basslink statement said its facilities were designed to be operated at a continuous rating of 500 MW, or at 630 MW for limited periods.

"In the circumstances which Basslink has received these reports, and while not accepting the conclusions and recommendations in the reports, Basslink will operate the interconnector at the continuous rating of 500 MW in line with good electricity industry practice," it said. "This will be an interim measure and this position coincides with Hydro Tasmania’s request."

Basslink said it would consult Siemens and Prysmian on the matters raised in the Hydro Tasmania reports.

“Another point to highlight is neither Basslink, nor its cable system manufacturers, Siemens and Prysmian, were consulted during the drafting of Hydro Tasmania’s reports, which makes the reports one-sided,” Eccles said.

Photo: courtesy Basslink

Subscribe to ITWIRE UPDATE Newsletter here

Active Vs. Passive DWDM Solutions

An active approach to your growing optical transport network & connectivity needs.

Building dark fibre network infrastructure using WDM technology used to be considered a complex challenge that only carriers have the means to implement.

This has led many enterprises to build passive networks, which are inferior in quality and ultimately limit their future growth.

Why are passive solutions considered inferior? And what makes active solutions great?

Read more about these two solutions, and how PacketLight fits into all this.


WEBINAR INVITE 8th & 10th September: 5G Performing At The Edge

Don't miss the only 5G and edge performance-focused event in the industry!

Edge computing will play a critical part within digital transformation initiatives across every industry sector. It promises operational speed and efficiency, improved customer service, and reduced operational costs.

This coupled with the new capabilities 5G brings opens up huge opportunities for both network operators and enterprise organisations.

But these technologies will only reach their full potential with assured delivery and performance – with a trust model in place.

With this in mind, we are pleased to announce a two-part digital event, sponsored by Accedian, on the 8th & 10th of September titled 5G: Performing at the Edge.


Sam Varghese

website statistics

Sam Varghese has been writing for iTWire since 2006, a year after the site came into existence. For nearly a decade thereafter, he wrote mostly about free and open source software, based on his own use of this genre of software. Since May 2016, he has been writing across many areas of technology. He has been a journalist for nearly 40 years in India (Indian Express and Deccan Herald), the UAE (Khaleej Times) and Australia (Daily Commercial News (now defunct) and The Age). His personal blog is titled Irregular Expression.

Share News tips for the iTWire Journalists? Your tip will be anonymous




Guest Opinion

Guest Interviews

Guest Reviews

Guest Research

Guest Research & Case Studies

Channel News